TLR LOSI LOS03035T1 1/10 1969 Camaro 22S No Prep Drag Car Brushless 2WD RTR - Summit

Losi LOS03035T1 1/10 1969 Camaro 22S No Prep Drag Car, Brushless 2WD RTR - Summit

IN THE BOX
(1) Losi 1969 Camaro Drag Car RTR
(1) Spektrum Firma 100 amp Smart ESC (installed)
(1) Spektrum Firma 6500kv Brushless Motor (installed)
(1) Spektrum SLT3 Transmitter and Dual Protocol Receiver (installed)
(1) Product Manual

NEEDED TO COMPLETE
2-3S LiPo Battery with IC5/EC5 Connector
LiPo Compatible Charger
Assorted tools (see manual for details)

OVERVIEW
Setting the standard in the industry for years, the Losi 1969 Camaro Drag Car is the most competitive No Prep Drag Racing Ready-to-Run. With the popularity of No Prep Drag Racing exploding, Losi has once again taken it to the next level with a truly innovative design and the quality workmanship drivers expect. The 69 Camaro has been carefully crafted to give a classic look while still fitting into the rules and regulations set by the No-Prep Drag Racing scene. It has all the advantages of an aluminum chassis such as electronics protection, side impact guards, and a clean wire management system with plenty of 22S option parts. It's designed with racers in mind with many outstanding features including officially licensed Mickey Thompson tires, limited travel oil filled front and rear shocks, low center of gravity rear shock tower, extended body mounts, optional heavy duty sway bar, adjustable weight front bumper, elevated transmission, adjustable turnbuckles, and a fully adjustable wheelie bar. You get an all-metal gear transmission for concrete dependability along with a Spektrum SLT3 transmitter and dual protocol receiver, Spektrum Firma 100 amp Smart ESC, and Spektrum Firma 6500kv brushless motor. From its unmistakable body, to rapid handling, everything about the Losi 1969 Camaro Drag Car is ready to provide racing thrills like nothing else.

FEATURES
- Spektrum Firma 100 Amp Smart ESC
- Spektrum Firma 6500kv Brushless Motor
- Spektrum SLT3 Transmitter and Dual Protocol Receiver
- All new 22S aluminum chassis
- Officially Licensed 1969 Chevrolet Camaro Body
- Officially Licensed Summit Racing Trim Scheme (Available on the T1 version)
- LED Lights
- Mickey Thompson branded Large Rear Drag Racing Slicks
- Mickey Thompson branded Low Drag, Front Tires
- All Metal Gear Transmission
- Elastomer Battery Straps
- Full Adjustable Wheelie Bar
- Aluminum Option Parts Available

PRODUCT SPECIFICATIONS
Approximate Assembly Time: No assembly required
Ball Bearings: Yes
Battery: Sold Separately
Body: Polycarbonate screen printed, 1.2mm thick
Brakes: Integral with ESC
Charger: Sold Separately
Chassis: 3mm plate, 6061-T6 aluminum
Completion Level: Ready-To-Run
Drivetrain: 2WD
Drive Type: Forward/Brake/Reverse
Front Track: 9.9" (252mm)
Power Type: Electric
Gear Pitch: 48P
Internal Gear Ratio: 2.43:1
Motor Type: Brushless - Sensorless
Pinion: 16T
Product Height: 6.6" (168 mm)
Product Length: 25.1" (638 mm)
Product Width: 11.08" (281 mm)
Radio: Included
Rear Track: 10.1" (256.5mm)
Receiver: Sold Separately
Scale: 1/10
Servos: Included
Shock Type: Oil-filled internal limited coil-over spring
Speed Control: lncluded
Spur Gear: 84T
Suspension: Lower A-arm, Upper link
Vehicle Type: Drag Car
Wheelbase: 13.1" (333 mm)