Tamiya 47429 1/10 PORSCHE 911 GT3 (EXCL ESC) TT-01E
by Tamiya
SKU TAM47429
Original price
$233.95
-
Original price
$233.95
Original price
$233.95
$233.95
-
$233.95
Current price
$233.95
Dispatch timeframe:
loading..
loading..
VIP in the Building!
The 911 GT3 Cup car was developed for the Porsche Super Cup, a single-make racing series gracing circuits around the world.
The VIP car recreated by this assembly kit was run by Porsche themselves and was driven upon invitation by a different driver according to the race.
Its powerful form and rear wing are recreated expertly in durable and lightweight polycarbonate, with separately molded side mirror parts, plus metal-plated light cases that allow the installation of separately sold LEDs front and rear. Stickers are included in the kit to recreate numerous sponsor logos and other markings
Image shows painted and assembled kit, with PS-55 Flat clear used.
FEATURES:
Bathtub Type Chassis Frame, Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD
F/R 3-Bevel Differentials
3-Piece Steering Tie-Rod
4-Wheel Double Wishbone Suspension
F/R Friction Dampers
WHAT'S INCLUDED:
Tamiya 1/10 TT01E Porsche 911 GT3 Cup VIP 2008 Kit
Wheels and Tyres
Clear Polycarbonate Body
540 Motor
REQUIRED FOR OPERATION(Not Included):
2 Channel Radio and Receiver
Standard Size Servo for steering
Electronic Speed Controller
Standard 7.2V NiMH Battery with Tamiya Connector
Charger for Battery
Paint and Building equipment
Evolved Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance.
Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a three-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive.
Mesh designs wheels are paired with racing slick tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E!
The glamorous, racy form of the car is recreated faithfully in durable and lightweight polycarbonate.
Side mirrors are components molded separately in plastic to give your car an extra touch of authenticity.
Mesh type wheels are paired with high performance slick tires, and stickers are included for tire logos.
At the rear, the car's "duck tail" design is accurately captured, and the rear wing is also polycarbonate.
Dedicated TT-01 Type-E upright designs offer excellent reliability and fit that translates into a great, long-lasting drive.
A three-piece steering tie rod setup employs aluminum pipes for superior parts fit and smooth steering motion.
This image shows an example of how drivers in R/C races can use the included transponder stay when setting up their car.
TECHNICAL SPECIFICATIONS:
?Length: 465mm
Width: 195mm
Height: 134mm
Wheelbase: 251mm
Tread: 157mm (Front), 165mm (Rear)
Tire Width/Diameter: 27/67mm
Gear Ratio=8.35:1
Type 540 Motor
The 911 GT3 Cup car was developed for the Porsche Super Cup, a single-make racing series gracing circuits around the world.
The VIP car recreated by this assembly kit was run by Porsche themselves and was driven upon invitation by a different driver according to the race.
Its powerful form and rear wing are recreated expertly in durable and lightweight polycarbonate, with separately molded side mirror parts, plus metal-plated light cases that allow the installation of separately sold LEDs front and rear. Stickers are included in the kit to recreate numerous sponsor logos and other markings
Image shows painted and assembled kit, with PS-55 Flat clear used.
FEATURES:
Bathtub Type Chassis Frame, Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD
F/R 3-Bevel Differentials
3-Piece Steering Tie-Rod
4-Wheel Double Wishbone Suspension
F/R Friction Dampers
WHAT'S INCLUDED:
Tamiya 1/10 TT01E Porsche 911 GT3 Cup VIP 2008 Kit
Wheels and Tyres
Clear Polycarbonate Body
540 Motor
REQUIRED FOR OPERATION(Not Included):
2 Channel Radio and Receiver
Standard Size Servo for steering
Electronic Speed Controller
Standard 7.2V NiMH Battery with Tamiya Connector
Charger for Battery
Paint and Building equipment
Evolved Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance.
Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a three-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive.
Mesh designs wheels are paired with racing slick tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E!
The glamorous, racy form of the car is recreated faithfully in durable and lightweight polycarbonate.
Side mirrors are components molded separately in plastic to give your car an extra touch of authenticity.
Mesh type wheels are paired with high performance slick tires, and stickers are included for tire logos.
At the rear, the car's "duck tail" design is accurately captured, and the rear wing is also polycarbonate.
Dedicated TT-01 Type-E upright designs offer excellent reliability and fit that translates into a great, long-lasting drive.
A three-piece steering tie rod setup employs aluminum pipes for superior parts fit and smooth steering motion.
This image shows an example of how drivers in R/C races can use the included transponder stay when setting up their car.
TECHNICAL SPECIFICATIONS:
?Length: 465mm
Width: 195mm
Height: 134mm
Wheelbase: 251mm
Tread: 157mm (Front), 165mm (Rear)
Tire Width/Diameter: 27/67mm
Gear Ratio=8.35:1
Type 540 Motor