REDEFINING 1/8 SCALE OFF-ROAD

Engineered. Tested. Built to a higher standard. The all-new Sledge is made to exceed your expectations for quality, toughness, and fun. The rock-solid chassis, massive steel drivetrain, ferocious 6s power, and race-inspired handling leave everything else in the dust. 

The all-new Sledge delivers a powerful and fulfilling Traxxas experience. This means class-leading power, ultimate quality, and durability that is engineered to be second to none.
 

Traxxas 95076-4 Sledge: 1/8 Scale 4WD Brushless Electric Monster Truck with TQi 2.4GHz Traxxas Link Enabled Radio System and Traxxas Stability Management (TSM) 

WHAT'S IN THE BOX: 

- Sledge, Ready-To-Race monster truck with Traxxas 2000kV brushless motor
- VXL-6s waterproof electronic speed control with integrated telemetry
- Quick Start Guide
- TQi 2.4GHz radio system
- High quality maintenance tools
- Jumper plug (for 4S battery use) 

WHAT YOU'LL NEED (SOLD SEPARATELY): 

- LiPo Batteries: Traxxas recommends dual 5000mAh 3-cell 11.1V Power Cell LiPo batteries for maximum performance. Dual 7600mAh 7.4V LiPo batteries or a single 6700mAh 14.8V LiPo battery will operate the vehicle with reduced performance. NiMH batteries are not supported. 

- LiPo Balance Charger with iD: Traxxas EZ-Peak Live 4S-capable charger is recommended for easy and fast charging performance (model #2971). 

- AA Alkaline Batteries: Four AA alkaline batteries for the transmitter. 

Batteries & Charger are not included, these are the compatible batteries and chargers:

Compatible Lipo Batteries:

• Traxxas 2842X 5000mAh 7.4v 2-Cell 25C LiPo Battery
• Traxxas 2843X - 5800mAh 7.4v 2-Cell 25C LiPo Battery
• Traxxas 2844R - 5200mAh 7.4v 2-cell 35C LiPo Battery
• Traxxas 2869X - 7600Mah 7.4V 2-Cell 25C Lipo Battery
• Traxxas 2872X - 5000mAh 11.1V 3-Cell 25C LiPo Battery
• Helios 11.1V 3S 5200mAh LiPo with Traxxas Plug

Compatible Nimh Batteries:

Compatible Chargers:

• Traxxas 2970 - Ez-Peak Plus 4-Amp Nimh/Lipo Fast Charger With Id Auto
• Traxxas 2971 - EZ-Peak Live 100W NiMH/LiPo charger (2971A)
• Traxxas 2972 - Charger, EZ-Peak Dual, 100W, NiMH/LiPo with iD Auto Battery Identification
• Traxxas 2973 EZ-Peak Live Multi-Chemistry Battery Charger w/Auto iD (4S/26A/200W)
• Traxxas 2981 - EZ-Peak Plus 4s Charger

Completer Packs:

• Traxxas 2990 - 2 of 3s 5000mah Battery/Charger Completer Pack
• Traxxas 2991 - 2 of 2s 7600mah Battery/Charger Completer Pack, Includes Ez Peak Dual Charger X 1 And 2-Cell 7600 Mah Lipo Batteries X 2

NB: Requires two batteries to operate
NB: Some batteries may require a battery expansion kit to fit properly.

FEATURES: 

- Up to 70+ mph with Two 3s LiPo Batteries
 - Sealed Ball Bearings
 - Hex hardware with Rust-Resistant Black Oxide Coating 

- VXL-6s Waterproof Electronic Speed Control
 - 6s LiPo compatible
 - Integrated cooling fan
 - Real-time telemetry via Traxxas Link
 - 3-LED status indicators
 - Powered accessory ports
 - 10-gauge silicone wire
 - Patented Traxxas High-Current Connectors 

- Velineon 2000kV Brushless Motor
 - 4-pole 2000kV brushless motor
 - 5mm output shaft
 - Finned can for better heat dissipation
 - Aluminum motor cradle mount 

- Traxxas Stability Management (TSM)
 - Improves straight line acceleration and braking on low-traction surfaces
 - Never dulls throttle or slows the truck
 - Adjusts from off to 100% assistance from the transmitter 

- TQi 2.4GHz High Output Radio System
 - TQi 2-channel transmitter
 - Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
 - Programmable multi-function knob
 - Adjustable steering and throttle percentage (dual rates)
 - Adjustable steering and throttle sensitivity (exponential)
 - Adjustable steering and throttle end points
 - High 13ms frame rate and near-zero latency for responsive control
 - 5-channel micro receiver (#6533) with fail-safe security
 - Patented waterproof receiver box with easy-access plug 

- Drivetrain
 - Heavy-duty steel driveshafts
 - Large 8mm steel stub axles
 - Steel dogbone center driveline
 - Protective rubber boots on differential inputs 

- Transmission
 - Mod-1 pinion and spur gears
 - Fixed gear mesh system
 - Torque-Biasing Center Drive 

- Differentials
 - Heavy-duty sealed 4-gear design
 - Large scale steel ring and pinion gears
 - Oversize 8mm output shafts
 - Steel drive cups
 - Easy-access bulkheads 

- Oil-filled GT-Maxx Shocks
 - Longer rear shocks for more travel
 - Machined aluminum threaded body
 - Extra-large bore and capacity
 - Large-diameter damper shaft
 - Lower cartridge with dual X-rings
 - Height-adjustable spring retainer
 - Lower spring perches bolted on 

- Suspension
 - Performance-optimized geometry
 - Ultra-tough composite arms
 - Oversize molded toe and camber links
 - Heavy-duty C-hubs
 - Multiple mounting points for suspension tuning 

- Chassis
 - 3.2mm ribbed aluminum chassis
 - Thick T-Bar for added rigidity
 - High-strength buttressing on shock towers
 - Ultra-thick 5mm 6061-T6 aluminum shock towers
 - Rugged locking battery compartment with quick-release door
 - Low-CG design for improved handling
 - Interlocking components for tight tolerances
 - Tough front and rear bumpers double as skid plates
 - Hidden wire management for clean appearance 

- ProGraphix Body
 - Clipless body mounting system
 - Rigid internal frame
 - Molded body reinforcements for tear-through protection
 - Protective roof skids
 - Rugged high-downforce rear wing 

- Wheels and Tires
 - Huge 6.7? Sledgehammer TSM-rated all-terrain tires
 - Tough 3.8? black wheels
 - Splined 17mm aluminum axle hubs 

- Steering
 - High-throw bellcrank steering design
 - Heavy-duty servo saver with aluminum posts
 - Metal servo horn
 - Powerful #2275 metal gear, fully waterproof servo 

TRUCK SPECS: 

Length (Including Wing): 23.78 inches (604mm)
Front Track: 18.10 inches (459mm)
Rear Track: 18.10 inches (459mm)
Ground Clearance: 1.95 inches (50mm)
Weight (No Battery): 12.74 pounds (5.77kgs)
Height (Overall): 8.43 inches (214mm)
Wheelbase: 15.10 inches (384mm)
Shock Length (front): 5.12 inches (128mm)
Shock Length (rear): 5.67 inches (144mm)
Tire Diameter: 6.7 x 3.3 inches (170mm x 84mm)
Wheel Diameter: 3.8 inches (97mm)
Speed Control: Velineon VXL-6s (#3485)
Motor (Electric): Velineon 2000kV Brushless
Overall Drive Ratio: 17.2 (13/52 motor pinion and spur gear)
Differential Type: Sealed, hardened steel bevel, limited slip
Gear Pitch: Module 1.0
Chassis Structure/Material: 3.2mm aluminum plate
Brake Type: Electronic
Drive System: Shaft-driven 4WD
Steering: Double-shear bellcrank w/metal servo arm
Wheels and Tires: 3.8? wheels, pre-glued Sledgehammer Tires and foam inserts; 6.7x3.8
Radio System: 2-Channel, TQi 2.4GHz transmitter with TSM receiver
Servo: 2275 Waterproof, metal-gear (347oz-in torque)
Top Speed: 70+ MPH with two 3S LiPo batteries and optional gearing (sold separately)
Skill Level: 4
Battery Tray Narrow Configuration (L/W/H): 181mm x 50mm x 29/37/45mm*
Battery Tray Wide Configuration (L/W/H): 160mm x 57mm x 29/37/45mm*
Required Batteries: 4 ?AA? (transmitter), Vehicle (see "What You'll Need" above) 

* Using included optional foam spacer 

MOTOR SPECS: 

Type: 2000kV sensorless brushless
Weight: 14.32oz (406g)
Length: 2.97 inches (76mm)
Diameter: 1.65 inches (42mm)
Connector Type: Traxxas 6.5mm bullet connectors 

ESC SPECS: 

Input Voltage (Cells): 4S?6S LiPo (max: 25.2 volts)
Case Size: 2.28 inches (58mm) x 2.83 inches (72mm) x 1.81 inches (46mm)
Weight: 7.30oz (207g)
BEC Voltage: 6.0V
BEC Current Continuous: 10A
BEC Current Peak: 20A
Reverse Delay: Yes, with lockout
Ports: RX input, auxiliary fan, Traxxas accessory port 

SERVO SPECS: 

Motor Type: Brushed
Operating Voltage: 6.0-7.4V DC
Torque: 347 oz-in (486 oz-in @7.4V)
Speed: 0.25 sec/60deg (0.16 sec/60deg @7.4V)
Weight: 67g
Gears: Metal
Output Spline: 25T
Case: Plastic top/bottom, anodized aluminum center
Controller: Digital