E-flite EFL14025 Ultra Stick 1.1m ARF

Introduction
The Mini Ultra Stick was E-flite's first-ever "wood" PNP (Plug-N-Play) and ARF (Almost-Ready-To-Fly) model that became an instant best-seller when it was released in 2005. It was available for more than a decade and is still iconic to this day because it went together as easily and in as little time as foam PNP models, yet offered the advantages of lightweight, stiff, and strong wood construction that delivered flight performance unlike similar class fully-molded EPS and EPO foam models. The Ultra Stick 1.1m is an updated and upgraded version that is slightly larger to offer even better flight performance with extremely popular and common 3S or 4S 2200?3200mAh batteries. It's available in an ARF version that bolts together and is ready for installation of your preferred power system and electronics, or in a BNF Basic version that's equipped with four factory-installed servos, a Spektrum Avian Smart ESC and motor, plus a 6-channel receiver with AS3X and SAFE Select technologies. Both versions are ready to accept two additional wing servos for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups, as well as optional wheel pants to look even more like the larger Hangar 9 Ultra Stick models the design is based on. That design offers excellent low-speed characteristics for easier landings, incredible high-speed handling, and impressive aerobatic capabilities that intermediate to experienced pilots will appreciate and enjoy!
Key Features:
Inspired by the iconic Mini Ultra Stick with modern-day technologies, features, and performance for "mild to wild" capabilities
A great first-ever "wood," everyday sport flying and aerobatic capable model for a wide range of pilots
Popular and affordable 2200?3200mAh batteries deliver a wide range of performance and flight times
Larger control surfaces for added control and sport to mild 3D aerobatic capabilities
Fast and easy bolt-together assembly ? no glue, tape, or special tools required
The option to add two more wing servos to utilize crow and/or flaps plus full-span ailerons/flaperons/spoilerons
One-piece wing with a fully-symmetrical airfoil that's quick and easy to install/remove with a single thumbscrew
Steerable tailwheel plus large tires for the ability to take off from/land on a variety of surfaces, including grass
Strong and stiff ? yet lightweight and long-lasting ? built-up wood construction
What's In The Box?
(1) E-flite? Ultra Stick 1.1m
(1) Product Manual
Required for Operation (Not Included)
(1) Full-range 4+ Channel Transmitter and Receiver
(4 or 6) Sub Micro Servos
(1) 250?500 watt Capable Motor and ESC
(1) 3S 11.1V or 4S 14.8V 2200?3200mAh LiPo
(1) Compatible LiPo Charger
Overview
The E-flite Ultra Stick 1.1m is based on the design of larger Hangar 9 Ultra Stick models and was inspired by the iconic Mini Ultra Stick. In 2005 the Mini Ultra Stick became an all-time top-seller as E-flite's first-ever "wood" PNP and ARF model that bolted together so it could be assembled as easily and in as little time as foam PNP models. It also offered the benefits that strong, stiff and lightweight, built-up wood construction offered ? which delivered flight performance unlike molded foam models. The Ultra Stick 1.1m is an updated, upgraded, and more refined version of the Mini Ultra Stick. The balsa and lite-ply airframe is still lightweight yet features stiffer tail surfaces ? that install quickly and easily with just two locknuts ? and a stronger mounting area for the main gear installed with four bolts. The one-piece wing is easy to install and remove thanks to the single thumbscrew, plus it's set up to accept two additional servos so you can split the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups.
The BNF (Bind-N-Fly) Basic version is equipped with four factory-installed metal-geared servos, a 3S and 4S compatible Spektrum motor, and an exclusive Avian 45-amp Smart Lite ESC that can provide a variety of real-time power system telemetry data with Smart and non-Smart batteries via compatible Spektrum AirWare? equipped transmitters. It's also equipped with an AR631 receiver to provide fly-by range and real-time telemetry data, including battery voltage, current, ESC temps, and more ? plus motor reversing for special ground handling and other capabilities ? along with the benefits of AS3X? and optional-use SAFE? Select technologies. Or, the ARF (Almost-Ready-To-Fly) version is ready for installation of your preferred electronics and power system! And because it's based on the design of larger Hangar 9 Ultra Stick models, it offers the same great low-speed flight characteristics that make for easier landings, along with excellent high-speed handling and outstanding basic to mild 3D aerobatic capabilities. You can even install the optional wheel pants (sold separately) to make it look more like larger Ultra Stick models! This makes it a perfect first-ever "wood," everyday sport flying and aerobatic capable model for a wide range of pilots.
Technical Specifications:
LiPo Compatibility
3S, 4S
Completion Level
Almost Ready-To-Fly
Recommended Motor Battery
3S 11.1V or 4S 14.8V 2200?3200mAh LiPo
Approximate Assembly Time
1-3 Hours
Flaps
Optional
Material
Wood
Servos
Sold Separately
Skill Level
Level 3
Trim Scheme Colors
Red, White, Black
Wingspan
43.31" (1100 mm)
Power Type
Electric
Battery
Sold Separately
Product Length
39.1" (993 mm)
Minimum Required Radio
Full-range 4?7+ Channel Transmitter
Radio
Sold Separately
Speed Control
Sold Separately
Charger
Sold Separately
Receiver
Sold Separately
Product Weight
31.7oz (898g) without Battery